Menu
Browse Protoly on mobile
Browse
Home Protocols Case Studies Publications
Account
Login Sign Up
Safety Resources
Safety Hub GHS Symbols PPE Guide Waste Disposal Compliance
Quick Links
Browse Protocols Case Studies Advanced Search

Personal Protective Equipment Guide

Essential PPE selection and usage for nanomaterial synthesis laboratories

Optimized for printing and lab display
Hierarchy of Controls

PPE is the last line of defense. Prioritize:

  1. Elimination or substitution of hazardous materials
  2. Engineering controls (fume hoods, ventilation)
  3. Administrative controls (procedures, training)
  4. Personal protective equipment (PPE)

Eye & Face Protection

Safety Glasses

Use for: General lab work, minimal splash hazard

Features:

  • Impact-resistant lenses (ANSI Z87.1)
  • Side shields for peripheral protection
  • Must fit snugly without gaps

Note: Not suitable for chemical splash protection

Chemical Splash Goggles

Use for: Working with liquid chemicals, nanomaterial suspensions

Features:

  • Indirect venting to prevent splashes
  • Form complete seal around eyes
  • Compatible with prescription glasses

Required: For all synthesis procedures involving liquids

Face Shield

Use for: High splash risk, pouring large volumes

Features:

  • Covers entire face from forehead to chin
  • Must be worn WITH goggles (not replacement)
  • Anti-fog coating recommended

Warning: Does not provide eye protection alone

Laser Safety Glasses

Use for: Working with lasers in characterization

Features:

  • Wavelength-specific protection
  • Optical density rating for laser class
  • Labeled with protected wavelengths

Critical: Must match laser wavelength exactly

Hand Protection

Important: No glove provides universal chemical protection. Select gloves based on specific chemicals being handled. Consult glove compatibility charts.
Nitrile Gloves

Resistant to:

  • Oils and petroleum products
  • Weak acids and bases
  • Many organic solvents

Not for: Ketones (acetone), strong oxidizers

Latex Gloves

Resistant to:

  • Aqueous solutions
  • Weak acids and bases
  • Biological materials

Warning: Latex allergies common; not for organic solvents

Neoprene Gloves

Resistant to:

  • Acids and bases
  • Alcohols
  • Some organic chemicals

Good for: General purpose chemical handling

Glove Usage Best Practices:
  • Inspect gloves before each use for tears or degradation
  • Remove gloves immediately if chemicals penetrate
  • Never reuse disposable gloves
  • Wash hands thoroughly after glove removal
  • Double-glove for highly hazardous materials
  • Remove gloves before touching doorknobs, phones, or keyboards

Body Protection

Laboratory Coat

Requirements:

  • 100% cotton or flame-resistant material
  • Long sleeves with elastic cuffs
  • Extends to knees
  • Snap or button closure (not zipper for easy removal)

Maintenance:

  • Launder regularly through institutional service
  • Never take contaminated coats home
  • Inspect for damage before use
  • Remove immediately if significantly contaminated
Disposable Lab Coat

Use for:

  • Working with nanomaterials (contamination risk)
  • High-hazard procedures
  • Single-use contamination protection

Features:

  • Tyvek or similar barrier material
  • Fluid-resistant
  • Disposed as hazardous waste after use

Respiratory Protection

CRITICAL: Respirators require medical clearance, fit testing, and training. Contact your institution's safety office before use.
N95 Filtering Facepiece

Use for:

  • Airborne particulates (dust, powder nanomaterials)
  • Non-oil-based aerosols

Limitations:

  • Does NOT protect against vapors or gases
  • Requires fit testing
  • Single-use in research environments
  • Must achieve proper seal (no facial hair)
Half-Face Respirator with Cartridges

Use for:

  • Organic vapors (with appropriate cartridge)
  • Acid gases
  • Combination particulate + vapor

Requirements:

  • Annual fit testing mandatory
  • Cartridge selection must match hazard
  • Replace cartridges per manufacturer schedule
  • Store in clean, dry location
When is Respiratory Protection Needed?
  • Work with airborne nanomaterials outside fume hood
  • Cleaning up powder spills
  • Insufficient ventilation for vapor control
  • Required by SDS or risk assessment

Note: Engineering controls (fume hoods) should be primary defense. Respirators are supplementary.

Foot Protection

Closed-Toe Shoes

Minimum Requirements:

  • Full coverage of foot (no sandals, open-toe shoes, or crocs)
  • Low heels for stability
  • Non-slip soles
  • Made of material that won't absorb chemical spills

Recommended for Nanomaterial Labs:

  • Leather or synthetic uppers (not canvas)
  • Chemical-resistant material
  • Easy to clean and decontaminate